Solar Chimneys and Exowatt’s P3 System
Solar energy is often discussed as if it means only one thing: photovoltaic panels turning sunlight directly into electricity. But there is another branch of solar energy that deserves more attention: solar heat.
Two fascinating examples show how wide this field can be. One is the solar updraft chimney, proven in Spain in the 1980s. The other is Exowatt’s P3 system, a new modular solar-thermal system aimed at powering AI-era data centers. One is a visionary experiment from the past; the other is an emerging commercial attempt to solve a very modern energy problem.
Both ask the same basic question: Can we use the sun’s heat, not just its light, to produce useful power?
1. The Solar Chimney Experiment in Spain
The “chimney and greenhouse” system you are thinking of is most likely the Manzanares solar updraft tower in Spain. It was built near Manzanares, south of Madrid, and became the best-known real-world test of a solar chimney power plant.
The project was led by German engineer Jörg Schlaich and funded by Germany’s Federal Ministry for Research and Technology. Its technical specifications were impressive for an experimental plant: a 194-meter tower, a 10-meter tower diameter, and a collector roughly 244 meters across. The collector used a greenhouse-like roof to heat air near the ground. (sbp)
The Manzanares plant was small by modern power-plant standards. It was designed around roughly 50 kilowatts of electric output, but its importance was not its size. Its importance was that it proved the concept could work outside the laboratory. Penn State’s solar-thermal course describes the Manzanares prototype as a couple-hundred-meter-scale system capable of producing tens of kilowatts, with the Spanish tower specifically listed at 194 meters and 50 kW. (courses.ems.psu.edu)
How a Solar Updraft Chimney Works
A solar updraft tower combines three simple principles:
- Greenhouse heating
A transparent collector roof traps solar heat near the ground. - The stack effect
Warm air is less dense than cooler air, so it rises. - Turbine generation
As the heated air rushes toward and up the chimney, turbines convert that moving air into electricity.
The collector acts like a giant greenhouse. The chimney acts like a vertical wind tunnel. The turbine sits in the airflow path. The stronger the temperature difference and the taller the tower, the stronger the updraft.
Penn State summarizes the concept clearly: solar energy heats air at the base of the tower, the density difference creates upward air movement, and that solar-induced wind spins turbines inside the chimney. (courses.ems.psu.edu)
Why the Manzanares Plant Mattered
The Manzanares experiment showed that solar chimneys are technically possible. It also taught engineers a major lesson: scale is everything.
A small tower produces only modest power. To produce utility-scale electricity, a solar chimney needs a very tall tower and a very large collector area. Penn State notes that power output depends mainly on two design variables: collector area and tower height. Commercial-scale collector concepts have been designed at 4–5 square miles, while some proposed towers reach as high as 1,500 meters. (courses.ems.psu.edu)
That is both the beauty and the problem of the technology. It uses simple physics and relatively ordinary materials, but it requires an enormous structure to compete with today’s wind, solar PV, and battery systems.
Current Global Status of Solar Chimneys
Solar updraft towers have not become a mainstream electricity technology. The Spanish prototype remains the iconic reference project, while later proposals in places such as Australia, India, South Africa, and China have struggled with cost, scale, and financing.
China did build a smaller solar chimney project in Inner Mongolia. A 2010 China Daily report said a 200-kW unit started operation in Wuhai’s Jinshawan area, with expected annual generation of 400,000 kWh. The same report framed the project as useful for desert regions because sand could absorb and store heat. (China Daily)
However, the broader technology has remained niche. A 2018 maturity assessment concluded that solar updraft towers were not yet competitive with more established renewable technologies such as wind, solar photovoltaics, or concentrating solar power. (ScienceDirect)
Today, the solar chimney’s strongest real-world influence may be in architecture and passive building design. Smaller solar chimneys can help ventilate buildings by using sun-heated air to create natural airflow. In that role, they do not need to generate electricity to be valuable. They can reduce cooling loads, improve indoor airflow, and lower energy demand.
2. Exowatt: A New Solar-Thermal System for the AI Era
Exowatt is a very different kind of solar-heat technology. Instead of using a giant greenhouse and chimney, Exowatt’s P3 system is a modular system designed to capture solar energy, store it as heat, and convert it into electricity when needed.
The company describes P3 as a renewable power system designed for AI-scale data centers. According to Exowatt, the system captures solar energy, stores it in a thermal battery, and converts it into electricity on demand, allowing up to 24 hours of dispatchable clean energy. (Exowatt)
That makes Exowatt part of a larger race to solve a growing problem: data centers, especially AI data centers, need enormous amounts of reliable electricity. They cannot simply turn off when the sun sets.
How Exowatt’s P3 System Works
Exowatt’s system can be understood in three stages:
Collect
Instead of flat solar panels, Exowatt says it uses lens-based heat collection. The goal is to concentrate sunlight and capture it as heat rather than immediately converting sunlight into electricity. (Exowatt)
Store
The captured heat is stored in a thermal battery. This is important because storing heat directly can be cheaper in some applications than converting everything immediately into electricity and storing it in lithium-ion batteries.
Dispatch
When electricity is needed, the stored heat is converted into power. Exowatt says this allows electricity to be generated on demand, including after sunset or during peak demand periods. (Exowatt)
In simpler terms: Exowatt is trying to turn sunlight into stored heat, then turn that heat into electricity when customers need it most.
Current Status of Exowatt Implementation
Exowatt is still early-stage compared with mature solar PV, wind, lithium-ion batteries, or even conventional concentrating solar power. But it is moving quickly.
In January 2026, Utility Dive reported that Exowatt had launched ExoRise, a business arm focused on powered land and renewable energy infrastructure for hyperscale data centers. Utility Dive also reported that Exowatt raised $70 million the previous year to commercialize its P3 technology, and that the company expected its first ExoRise pilot project to come online by the end of 2026. (Utility Dive)
Data Center Dynamics similarly reported that ExoRise is intended to combine land, power, and Exowatt’s solar-plus-storage technology for hyperscale data centers. It also described the P3 as a modular system that captures solar energy, stores it as heat in a long-duration thermal battery, and converts that heat into electricity on demand. (Data Center Dynamics)
Still, there is uncertainty. Latitude Media reported in January 2026 that Exowatt had shifted toward a developer-style business model and noted skepticism about whether the technology could meet data-center reliability needs on its own. Latitude also reported that, despite Exowatt’s stated backlog, the company had not disclosed specific projects or customers at that time. (Latitude Media)
So the fair status is this: Exowatt is promising and well-funded, but not yet proven at large commercial scale.
Comparing the Two Technologies
| Category | Solar Updraft Chimney | Exowatt P3 |
|---|---|---|
| Energy type | Solar heat | Solar heat |
| Main mechanism | Greenhouse heats air; hot air rises through chimney; turbine generates power | Concentrated solar heat is stored in a thermal battery and converted to electricity |
| Best-known project | Manzanares, Spain | Exowatt P3 / ExoRise |
| Maturity | Proven experimentally, but not widely commercialized | Early commercial stage, pilot deployments expected |
| Main challenge | Enormous tower and land requirements | Must prove performance, cost, and reliability at scale |
| Climate relevance | Low-tech renewable concept; useful influence on passive buildings | Possible clean power source for data centers and industrial loads |
Climate Relevance: Why These Ideas Matter
Solar chimneys and Exowatt’s P3 system come from different eras, but both are part of a broader climate lesson: the energy transition needs more than one kind of solar technology.
Solar photovoltaics will remain central. Wind power will remain central. Batteries will remain central. But the deeper we move into electrification, AI infrastructure, industrial decarbonization, and grid congestion, the more we need dispatchable, flexible, and locally deployable clean energy options.
Solar chimneys remind us that simple physics can inspire bold infrastructure. They may never dominate the grid, but they remain a powerful example of low-fuel, low-complexity renewable design.
Exowatt represents the newer challenge: how to power massive, always-on digital infrastructure without defaulting to fossil gas. If systems like P3 can deliver clean power reliably and affordably, they could help prevent the AI boom from becoming a fossil-fuel boom.
A Balanced Takeaway
The solar chimney is a proven but commercially difficult idea. It works, but scaling it requires very large structures and major upfront investment.
Exowatt is a promising but still unproven idea. It is designed for a real and urgent market: data centers that need reliable clean power. But until its pilots and deployments demonstrate performance at scale, it should be treated as an emerging technology rather than a settled solution.
Together, they show that solar energy is not just about panels on rooftops. It is also about air, heat, storage, architecture, land, and time.
For climate adaptation and resilience, that matters. The future energy system will not be built from one perfect technology. It will be built from a diverse toolkit: proven renewables, storage, efficiency, passive design, community-scale systems, and new experiments that are tested honestly.
The Manzanares solar chimney and Exowatt’s P3 system belong in that conversation—not as magic fixes, but as reminders that the sun gives us more than light. It gives us heat, movement, storage potential, and design possibilities that we are still learning how to use.

